Sdj3400 Hand Plastic Welding Extruder Machine

Model NO.: SDJ3400 Plastic Processed: PP, PVC, PVDF Feeding Mode: One Feed Screw: Single-Screw Automation: Automatic Hot Air Blower: Leister, Switzerland Preheating Air Volume: 500L/Min Frenquency: 50/60 Hz Trademark: SUDA Specification: CE ISO SGS HS Code: 84688000 Type: Sheet Extruder Product Type: Extruder Welding Machine Assembly Structure: Integral Type Extruder Exhaust: Don′t Exhaust Computerized: Non-Computerized Drive Unit: Metabo, Germany Installation Guidline: Provide Video or Pictures Colour: Green Transport Package: Carton Boxes Origin: China SDJ3400 Hand Plastic Welding Extruder Machine 


Please read operating instructions carefully before use and keep it for further reference.
 
Product Overview>>>
 
SDJ3400 Series Extruding plastic gun is a new type of hot air welder which imported foreign advanced technology. 
Reasonable structure, convenient operation, continuous welding, high working efficiency, powerful extrusion, to make the weld strength is greatly improved,It is the idealproduct for a variety of thermoplastic welding processing.
Available welding materials: thermoplastic HDPE, PP, PVDF, especially PE .Don't apply in a conductive plastic(PEEL), or cause the machine to produce a conductive short-circuit.

Main technical parameters>>>

Model	SDJ3400
Voltage	220V
Motor Power	1100W
Air Heating Power	3400W
Welding Speed	3.0kg/4mm
Rod diameter	3.0-4.0mm
Machine Weight	15kg
Warranty	12months
Certificate	CE,ISO9001
Dellivery	2-3workdays after payment

 
Operation procedures>>>
 
1) Put the welding gun on the shelf, install the handle, plug in the mains plug.
 
2) Open the control box switch, welding temperature is generally set at 300 ° C,  Open the hot air machine power switch,thermostat knob, heated a few minutes to operate.

3) The right hand pull the motor switch, the motor starts to rotate. The new machines have noise, probably It mostly is relevant to the resonance between the tool and the base or the close of the parts inside the tool.If the motor is very smooth,and the internal sound disappears after sending welding rods. 

4)The air temperature and air volumedetermine welding 's strength.Usually hot air temperature is 260 ~ 400 °

5)Hot air motor carbon brush life is about 800 hours, attention to early replacement, do not wait until the carbon brushes to run out.

6) When shutdown, please circumgyratehot air thermostat knob to the minimum, a few minutes blowing before they shut down the hot air machine.
 
Product Features>>>
 
1)Imported hot air welding torch and imported driven system, high temperature, big torque, long service life, stable performance.

2)Light weight, easy to handle and available to operation at different angles.

3)Big extrusion volume can be welded more than 10mm welding seam.

4)Different welding shoes can be applied to different types of welding.

5)It is used in the tank and pipe and comply with Part 4 of the DVS standard (Germany Welding Association).
 
Product warranty>>>

This welding machine warranty period from the date of delivery for one year.


Welcome your inquiry and sample order!!!

Suda Plastic Pipe Welding Machinery Co.,Ltd.
Contacts: Jenny
Mobile:0086-15064878065
Tel:0086-532-67735116
Fax:0086-532-66569132
 

Contact us if you need more details on Hand Extruder Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Plastic Extruder Welding Machine、Leister HDPE Plastic Hand Extruder Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Plastic Hand Extruder